SURGE ELIMINATOR &
POWER CONDITIONER

• Advanced Series Mode^® Surge Elimination
• impedance Tolerant^® EMI/RFI Filtering
• SurgeX ICE^® Inrush Current Elimination
• COUVS^® Catastrophic Over/Under-Voltage Shutdown
• Remote Control Capability

Switched receptacles can be controlled with an applied voltage (5-30 vdc) or contact closure switch connected to the Phoenix connector on the back panel. The connector can also be used to cascade multiple units or provide status to a central controller.

The SX1210RTi provides guaranteed surge elimination and power conditioning for audio, video, broadcast and computer equipment. The units are 10-amp load-capable and have 10 industrial grade earthed AC receptacles (8 switched, 2 always on) plus a front panel courtesy receptacle.

The unit features both common mode and normal mode Impedance Tolerant^® EMI/RFI filtering; SurgeX ICE^® -Inrush Current Elimination and COUVS^® -Catastrophic Over/Under Voltage Shutdown for a complete power conditioning solution.

SurgeX Advanced Series Mode^® technology is superior to conventional MOV circuitry or MOV-Hybrid designs and is completely non-sacrificial. Our zero let-through technology provides the most reliable protection available. It stops all surges up to 6,000 volts (unlimited surge current) without producing harmful side effects such as earth contamination or common-mode disturbances.

DOWNLOAD SPECS   -   INSTALLATION GUIDE

The SX1210RTi has remote turn on capability for use in AC power distribution systems and can be interfaced with other SurgeX products with remote turn on capability*

SPECIFICATIONS

Load Rating: 10 amps @ 230 volts

Power Requirement (no load): 6 watts

Surge Let-Through Voltage (6000-volt surge): 0 volts

IEC/EN; 61643-1 Performance Rating: Grade A, Class 1, Mode 1

EMI/RFI Filter, Normal Mode (50-ohm load):
40dB @ 100kHz; 50dB @ 300kHz; 50dB @ 3MHz; 50dB @ 30MHz

EMI/RFI Filter, Common Mode (50-ohm load):
18dB @ 300kHz; 30dB @ 1MHz; 50dB @ 3MHz; 50dB @ 20MHz

Maximum Applied Surge Voltage: 6000 volts*

Maximum Applied Surge Current:
Unlimited, due to current limiting*

Maximum Applied Surge Energy:
Unlimited, due to current limiting*

Endurance (C62.41-1991 Category B3 pulses):
1 kV>500,000; 3 kV>10,000; 6 kV>1000

Undervoltage Shutdown: 160 volts (auto resetting)

Overvoltage Shutdown: 280 volts (auto resetting)

Maximum Load Inrush Current During Power-up: 1000 Joules

Remote Turn-on Applied Voltage Range: 5 to 30 volts DC

Remote Turn-on Current Draw:
Contact Closure: 1.5mA
5V DC Applied Voltage: 0.1mA
12V DC Applied Voltage: 1.5mA
24V DC Applied Voltage: 5.0mA

Auxiliary Relay Contact Rating: 30 Volts at 1 Amp

LED Output: 12 volts DC, maximum 20 mA (resistor required)

Dimensions: 1.75"H x 19"W x 10.5"D (4.5 x 48.3 x 26.7cm)

Weight: 11 lbs (5.0 kg)

Temperature Range: 5° to 35° C

Humidity Range: 5% to 95% R.H., non-condensing

*1.2 x 50µs pulse, industry standard combination wave surge, as per IEEE C62.41

FEATURES

• Magnetic shielding steel enclosure
• 9' power cord
• 10 earthed AC receptacles on rear panel (8 switched, 2 always on)
• Front panel courtesy receptacle
• Advanced Series Mode^® Surge Elimination
• Advanced Impedance Tolerant^® EMI/RFI filtering
• SurgeX ICE^® inrush current elimination
• COUVS^® catastrophic over/under voltage shutdown
• Thermal circuit breaker overload protection
• Self-test circuit with visual indicator
• 10-year warranty
• Engineered in the U.S.A.

TECHNICAL DESCRIPTION

The SX1210RTi shall be a one-rack-space unit in a magnetic shielding steel enclosure. It shall operate from 230 volts AC and have a 9-foot power cord. There shall be 10 earthed AC receptacles on the back panel, with 8 switched and 2 always on. The unit shall have a front-panel courtesy receptacle and remote-control capability with a visual indicator. Overall dimensions shall be 4.5cm x 48.3cm x 26.7cm (1.75"H x 19"W x 10.5"D). Weight shall be 5Kg (11 Lbs).

The SX1210RTi shall have a load rating of 10 amps at 230 volts, a self-test circuit with visual indicator, and provide EMI/RFI filtering, inrush current elimination and catastrophic over/under-voltage shutdown. It shall meet Grade A, Class 1, Mode 1 guidelines for powerline surge suppressors and withstand at least 1000 occurrences of surge pulse voltages up to 6000 volts.

Countries Included in this Region

Australia China New Zealand Fiji Papa New Guinea

All SurgeX products are backed by a 10 year warranty

Specifications subject to change without notice. SurgeX International is a division of New Frontier Electronics Inc.

This product, including its components and/or processes carried out thereby, are covered by one or more of the following: U.S. Pat. No. 4,870,534. 4,870,528. 6,728,089. 6,744,613. 7,068,487. Can. Pat. No. 1,333,191. 1,332,439. 0ther Patents Pending.